Maxwell relations

 ( James Clerk Maxwell ) 

, $\backslash kappa$ compressibility, $C\_V$ heat capacity at constant volume, $C\_P$ heat capacity at constant pressure.

]]

Maxwell's relations are a set of equations in thermodynamics which are derivable from the symmetry of second derivatives and from the definitions of the thermodynamic potentials. These relations are named for the nineteenth-century physicist James Clerk Maxwell.

---

Equations The structure of Maxwell relations is a statement of equality among the second derivatives for continuous functions. It follows directly from the fact that the order of differentiation of an analytic function of two variables is irrelevant (Schwarz theorem). In the case of Maxwell relations the function considered is a thermodynamic potential and $x\_i$ and $x\_j$ are two different natural variables for that potential, we have

where the partial derivatives are taken with all other natural variables held constant. For every thermodynamic potential there are $\backslash frac\{1\}\{2\}\; n(n-1)$ possible Maxwell relations where $n$ is the number of natural variables for that potential.

---

The four most common Maxwell relations The four most common Maxwell relations are the equalities of the second derivatives of each of the four thermodynamic potentials, with respect to their thermal natural variable (temperature $T$, or entropy and their mechanical natural variable (pressure $P$, or volume

where the potentials as functions of their natural thermal and mechanical variables are the internal energy $U(S,\; V)$, enthalpy $H(S,\; P)$, Helmholtz free energy $F(T,\; V)$, and Gibbs free energy $G(T,\; P)$. The thermodynamic square can be used as a mnemonic to recall and derive these relations. The usefulness of these relations lies in their quantifying entropy changes, which are not directly measurable, in terms of measurable quantities like temperature, volume, and pressure.

Each equation can be re-expressed using the relationship $$\backslash left(\backslash frac\{\backslash partial\; y\}\{\backslash partial\; x\}\backslash right)\_z\; =\; 1\backslash left/\backslash left(\backslash frac\{\backslash partial\; x\}\{\backslash partial\; y\}\backslash right)\_z\backslash right.$$ which are sometimes also known as Maxwell relations.

---

Derivations

---

Short derivation Source:

A. B. Pippard (1957). 9780521091015, Cambridge University Press. . ISBN 9780521091015

Suppose we are given four real variables $(x,\; y,\; z,\; w)$, restricted to move on a 2-dimensional $C^2$ surface in $\backslash R^4$. Then, if we know two of them, we can determine the other two uniquely (generically).

In particular, we may take any two variables as the independent variables, and let the other two be the dependent variables, then we can take all these partial derivatives.

Proposition: $\backslash left(\backslash frac\{\backslash partial\; w\}\{\backslash partial\; y\}\backslash right)\_\{z\}\; =\; \backslash left(\backslash frac\{\backslash partial\; w\}\{\backslash partial\; x\}\backslash right)\_\{z\}\; \backslash left(\backslash frac\{\backslash partial\; x\}\{\backslash partial\; y\}\backslash right)\_\{z\}$

Proof: This is just the chain rule.

Proposition: $\backslash left(\backslash frac\{\backslash partial\; x\}\{\backslash partial\; y\}\backslash right)\_z\; \backslash left(\backslash frac\{\backslash partial\; y\}\{\backslash partial\; z\}\backslash right)\_x\; \backslash left(\backslash frac\{\backslash partial\; z\}\{\backslash partial\; x\}\backslash right)\_y\; =\; -1$

Proof. We can ignore $w$. Then locally the surface is just $ax\; +\; by\; +\; cz\; +\; d\; =\; 0$. Then $\backslash left(\backslash frac\{\backslash partial\; x\}\{\backslash partial\; y\}\backslash right)\_z\; =\; -\backslash frac\{b\}\{a\}$, etc. Now multiply them.

Proof of Maxwell's relations:

There are four real variables $(T,\; S,\; p,\; V)$, restricted on the 2-dimensional surface of possible thermodynamic states. This allows us to use the previous two propositions.

It suffices to prove the first of the four relations, as the other three can be obtained by transforming the first relation using the previous two propositions. Pick $V,\; S$ as the independent variables, and $E$ as the dependent variable. We have $dE\; =\; -pdV\; +\; TdS$.

Now, $\backslash partial\_\{V,S\}E\; =\; \backslash partial\_\{S,\; V\}E$ since the surface is $C^2$, that is,$$\backslash left(\backslash frac\{\backslash partial\; \backslash left(\backslash frac\{\backslash partial\; E\}\{\backslash partial\; S\}\backslash right)\_\{V\}\}\{\backslash partial\; V\}\backslash right)\_\{S\}\; =\; \backslash left(\backslash frac\{\backslash partial\; \backslash left(\backslash frac\{\backslash partial\; E\}\{\backslash partial\; V\}\backslash right)\_\{S\}\}\{\backslash partial\; S\}\backslash right)\_\{V\}$$which yields the result.

---

Another derivation Source:

Since $dU\; =\; TdS\; -\; PdV$, around any cycle, we have$$0\; =\; \backslash oint\; dU\; =\; \backslash oint\; TdS\; -\; \backslash oint\; PdV$$Take the cycle infinitesimal, we find that $\backslash frac\{\backslash partial(P,\; V)\}\{\backslash partial(T,\; S)\}\; =\; 1$. That is, the map is area-preserving. By the chain rule for Jacobians, for any coordinate transform $(x,\; y)$, we have$$\backslash frac\{\backslash partial(P,\; V)\}\{\backslash partial(x,\; y)\}\; =\; \backslash frac\{\backslash partial(T,\; S)\}\{\backslash partial(x,\; y)\}$$Now setting $(x,\; y)$ to various values gives us the four Maxwell relations. For example, setting $(x,\; y)\; =\; (P,\; S)$ gives us $\backslash left(\backslash frac\{\backslash partial\; T\}\{\backslash partial\; P\}\backslash right)\_S\; =\; \backslash left(\backslash frac\{\backslash partial\; V\}\{\backslash partial\; S\}\backslash right)\_P$

---

Extended derivations Maxwell relations are based on simple partial differentiation rules, in particular the Total derivative and the symmetry of evaluating second order partial derivatives.

---

Derivation based on Jacobians If we view the first law of thermodynamics, $$dU\; =\; T\; \backslash ,\; dS\; -\; P\; \backslash ,\; dV$$ as a statement about differential forms, and take the exterior derivative of this equation, we get $$0\; =\; dT\; \backslash ,\; dS\; -\; dP\; \backslash ,\; dV$$ since $d(dU)\; =\; 0$. This leads to the fundamental identity $$dP\; \backslash ,\; dV\; =\; dT\; \backslash ,\; dS.$$

The physical meaning of this identity can be seen by noting that the two sides are the equivalent ways of writing the work done in an infinitesimal Carnot cycle. An equivalent way of writing the identity is $$\backslash frac\{\backslash partial(T,S)\}\{\backslash partial(P,V)\}\; =\; 1.$$

The Maxwell relations now follow directly. For example, $$\backslash left(\backslash frac\{\backslash partial\; S\}\{\backslash partial\; V\}\; \backslash right)\_T$$

        = \frac{\partial(T,S)}{\partial(T,V)}
        = \frac{\partial(P,V)}{\partial(T,V)}
        = \left(\frac{\partial P}{\partial T} \right)_V,
     

The critical step is the penultimate one. The other Maxwell relations follow in similar fashion. For example, $$\backslash left(\backslash frac\{\backslash partial\; T\}\{\backslash partial\; V\}\; \backslash right)\_S$$

        = \frac{\partial(T,S)}{\partial(V,S)}
        = \frac{\partial(P,V)}{\partial(V,S)}
        = - \left(\frac{\partial P}{\partial S} \right)_V.
     

---

General Maxwell relationships The above are not the only Maxwell relationships. When other work terms involving other natural variables besides the volume work are considered or when the Particle number is included as a natural variable, other Maxwell relations become apparent. For example, if we have a single-component gas, then the number of particles N  is also a natural variable of the above four thermodynamic potentials. The Maxwell relationship for the enthalpy with respect to pressure and particle number would then be:

$$\backslash left(\backslash frac\{\backslash partial\; \backslash mu\}\{\backslash partial\; P\}\backslash right)\_\{S,\; N\}\; =\; \backslash left(\backslash frac\{\backslash partial\; V\}\{\backslash partial\; N\}\backslash right)\_\{S,\; P\}\backslash qquad=\; \backslash frac\{\backslash partial^2\; H\; \}\{\backslash partial\; P\; \backslash partial\; N\}$$

where is the chemical potential. In addition, there are other thermodynamic potentials besides the four that are commonly used, and each of these potentials will yield a set of Maxwell relations. For example, the grand potential $\backslash Omega(\backslash mu,\; V,\; T)$ yields:

---

See also

• Table of thermodynamic equations
• Thermodynamic equations

Post Comment